BMW Car Body Repair Nottingham
BMW Car Body Repair Nottingham
Defective paintwork on the bonnet of this BMW 3 Series.
Thoroughly stripped to bare metal then primed three times.
Baked on a warm cycle then flatted.
Cleaned with anti-static panel wipe then back into the oven. Painted and given three generous coats of protective clear coat.
Fitted back to car and looked good.
Products used during this repair:
Mirka 80g 180g 320g abrasive discs.
AXALTA Syrox Undercoat Sanding Surfacer.
Mirka 600g Goldflex Soft pads.
Performance Panel Wipe.
Performance Tack Rag.
Indasa 1” and 2” Adhesive Tape.
AXALTA Syrox Water Based Colour Basecoat.
AXALTA Syrox FLEX CLEAR.
3M 1500g abrasive film discs.
3M 3000g Trizact Disc.
ROAR CERAMIC CUT cutting compound
ROAR CERAMIC FINISH finishing compound.
